Many people choose swimwear based on appearance alone, but discomfort often comes from improper wearing, incorrect sizing, or poor care. Common issues include:
-
Shifting or sliding after entering the water
-
Visible pressure marks on shoulders or waist
-
Lack of bust or core support
-
Loss of elasticity after only a few wears
This guide walks you through how to wear Shapellx swimwear correctly, how to choose styles for different body types and occasions, and how to care for your swimwear so it lasts longer and performs better.
1. How to Put On Your Shapellx Swimsuit Correctly (Very Important)
Step 1: Put it on from the bottom up
-
Step into the swimsuit from the legs first
-
Position the crotch area correctly before pulling upward
-
Gently guide the fabric over the waist and bust
Wearing it this way helps the fabric sit naturally on the body and reduces unnecessary tension.
Step 2: Adjust the bust and straps
-
Ensure the bust is fully centered in the cups
-
Shoulder straps should feel supportive but not tight
-
If adjustable, fine-tune straps in front of a mirror
Step 3: Check key fit points
After putting it on, try these movements:
-
Raise your arms
-
Squat slightly
-
Twist your torso
If the swimsuit stays in place without pulling or slipping, the fit is correct.
2. Swimwear Wearing Tips by Body Type
🍎 Apple-shaped bodies
-
Choose styles with stronger midsection coverage
-
Smooth the fabric over the abdomen before adjusting upward
-
Avoid pulling the suit up all at once
🍐 Pear-shaped bodies
-
Ensure the bottom fabric is fully extended
-
Position the crotch area correctly to avoid riding up
-
Balance proportions by adjusting the upper section gently
⏳ Hourglass bodies
-
Focus on natural alignment rather than over-tightening
-
Keep the waistline at its intended position
-
Let the design enhance, not compress, your curves
3. Wearing Swimwear for Different Occasions
🌴 Beach & Vacation
-
Prioritize comfort and smooth silhouettes
-
Pair with cover-ups, sarongs, or lightweight layers
-
Double-check strap and side stability before heading out
🏊 Pool & Water Activities
-
Choose styles with stronger support and secure construction
-
Ensure all fit points are stable before entering the water
-
Avoid sharp accessories that may damage fabric
4. Swimwear Care & Washing Guide—Expert-Backed Best Practices
Proper swimwear care is essential to maintain elasticity, color, and long-term performance. Exposure to chlorine, saltwater, sunscreen, sweat, and heat can quickly break down delicate fibers if not handled correctly. The following steps reflect widely recommended garment-care best practices and expert-backed guidance.
1️⃣ Rinse Immediately After Every Wear
After swimming, always rinse your swimsuit with cool, clean water as soon as possible.
Why this matters:
-
Chlorine and salt degrade elastic fibers
-
Sunscreen and body oils can stain and weaken fabric
How to do it properly:
-
Rinse inside and out
-
Use cool water only (hot water accelerates fiber damage)
-
Continue until water runs clear
Even if you can’t wash your swimsuit right away, rinsing immediately can significantly extend its lifespan.
2️⃣ Hand Washing Is the Safest Method
Hand washing is strongly recommended for swimwear made with nylon, spandex, or elastane blends.
Steps:
-
Fill a basin with cold water
-
Add a small amount of mild, neutral detergent
-
Soak for 5–15 minutes
-
Gently press and move the fabric to release residue
-
Rinse thoroughly with cool water
Avoid scrubbing, twisting, or wringing, as these actions stretch and weaken fibers.
3️⃣ Machine Washing — Only If Necessary
If the care label allows machine washing:
-
Place the swimsuit in a mesh laundry bag
-
Use a gentle or delicate cycle
-
Select cold water only
-
Use mild detergent
Never use bleach, fabric softener, or heavy-duty cycles. These can permanently damage elasticity and color.
4️⃣ Drying: Air Dry Only, No Heat
Heat is the fastest way to ruin swimwear.
Do not:
-
Tumble dry
-
Iron or steam
-
Dry in direct sunlight
Best method:
-
Gently press excess water out with a towel (do not wring)
-
Lay flat or hang to air dry in the shade
5️⃣ Detergent & Product Awareness
Use only mild detergents designed for delicates.
Avoid:
-
Bleach
-
Fabric softeners
-
Brighteners or harsh chemicals
Additional tips:
-
Apply sunscreen before putting on your swimsuit and allow it to absorb
-
Avoid sitting directly on rough surfaces like concrete or pool edges
6️⃣ Proper Storage Between Wears
-
Ensure swimwear is completely dry before storing
-
Fold gently instead of hanging by straps
-
Store in a cool, dry place
-
Avoid airtight plastic bags that trap moisture
5. Recommended Shapellx Swimwear Styles (By Need)
Based on the current Shapellx Swimwear collection, these recommendations help you choose the right style for your needs. Specific product links can be added in the backend.
⭐ For Everyday Comfort & Figure Smoothing
Recommended: High-Coverage One-Piece Swimwear
-
Strong core coverage and smoothing effect
-
Ideal for first-time shapewear swimwear wearers
-
Great for vacations and relaxed pool days
⭐ For Extra Support & Security
Recommended: Built-in Support or Reinforced Swimwear
-
Enhanced bust support and stability
-
Suitable for swimming and active water use
⭐ For Vacation Styling & Photo Moments
Recommended: Design-Forward or High-Waisted Styles
-
Visually elongates proportions
-
Perfect for beach trips and resort wear
Between Two Sizes? Here’s What to Do
-
Prefer comfort → size up
-
Prefer firmer support → size down and follow proper wearing steps
For more detailed answers about sizing, comfort, and product care, you can also explore our Shapellx FAQs & Honest Answers
Swimwear Is Part of the Experience
A great swimsuit should feel comfortable when worn, stay secure during movement, and maintain its shape over time. With proper wearing techniques, thoughtful style selection, and correct care, your Shapellx swimwear will support you through many seasons of sun, water, and confidence.
